Trades · Courses
Concrete & Masonry
Slabs, footings, columns, mortar, and block counts.
Carpentry & Framing
Stairs, beams and spans, board feet, cut angles.
Electrical
Ohm's law, wire gauge, voltage drop, conduit fill.
Industrial Electrical
Three-phase power, motor circuits, feeders, and voltage drop.
Automation & PLC
Signal scaling, ladder logic, timers and counters, I/O.
- Beginner
PLC basics, made visual
What the box in the panel actually does: inputs, outputs, and the scan — then the three ladder circuits that run most of a plant, with a live simulator to prove every one.
4 lessons
- Intermediate
Ladder logic patterns
The circuits behind almost every machine — relays that remember, interlocks that protect, timers that run whole sequences. Each pattern comes from a real Logix print you load and run in the builder.
5 lessons
- Intermediate
Analog & instrumentation
The floor isn't just ON and OFF — levels, pressures and temperatures arrive as 4–20 mA signals. Scale them, compare them into rungs, tame them with deadbands, write recipes with MOV, and learn the two ways an instrument lies. Every lesson runs its circuit live in the builder.
6 lessons
Industrial Robotics
Robot cells from the PLC side: handshakes, program select, safety chains.
Industrial Maintenance
Drive ratios, belts and gears, bolt torque, alignment.
Plumbing
Drain slopes, pipe sizing, pressure.
Estimating
Multi-trade project estimates, markup and margin.